Search:

Please update thread once you receive the cover.... pics installed would be nice too. :)
I would like a cover that is towable..

Looks great!

I am at 249.6, see what happens on the next outing. :)

I wonder if older models are affected ('14 Mojo). I am at 240ish now and adding more. I am hoping with the '15's going to Ford engines, may have been related.

try this website... https://www.greatlakesskipper.com they carry a lot of the oem parts.

ditto, let the charger trickle the batteries all winter.

They were oem on past Supra. Want to say they were fitted on the front of the seat versus the back.

2014 Mojo - 219hrs

Agree with the above. Sometimes the factories ones will show up on ebay. Might try contacting these folks.. https://greatlakesskipper.com

Ski will be about the same and surf will be better.

I used to take 2 cabin cushions out my '10 LSV and place in the back locker. Don't now with my current ride. I do keep the speed at 70 while towing.

Spray it with WD40, unplug the coil, and bump it over. it should start walking out. I use 2 paint can openers, one at 3 and 9 to pry out. I keep telling myself I am going to order a puller, but...

Don't have closed cooling, but I go in from the port side locker, laying on my side in the locker.

"They apparently reached out to Indmar saying it was a product issue " with the tranny?? I have a '14 and curious.

Congrats on the new ride! I want to recall mine is located right in the front of the vdrive.

Never been a big fan of the tribals. That is a much cleaner look. IMO

That is a deal. I love mine.

My boat is stored indoors. I disconnect the grounds, connect the onboard charger and leave plugged in so they get tickled all winter. I don't charge in the summer months as we are always using it.

I don't pic of my 02 lsv, used a cutting board and mounted using the bow back bolts, only had 1 amp. HTMS.

This was my '10 LSV, setup. Made a riser so I could shove the batteries further forward...

I have a very similar setup that has been used for Years with no issue.

On the port side there is no predrilled hole on the upright tube. Why it was not done, since they did one on the starboard side for the darn light....urrrrrr

Seems most have drilled a hole in the...

Looks good!

Is it leaf spring or torsion axle? Leaf springs can start "squeak" .

if this helps, typically the single axle has 15" wheels and a dual has 14".

Ditto, I have never beached my inboard boat. I use a bungee cord on my front anchor line, use a line on the back. Using a bungee on the front pulls the boat back out from shore. Use the back line...