Type: Posts; User: jcarter20
The level was not low, but I did wonder about air in the system. When you say small hose, is that on the port side of the motor? I have a heater, so rather than the connector loop, I have two hoses...
The weird thing is at 2000 rpm’s temp went to 169. I backed it off to idle and it dropped to 165 and then raised all the way up to 171 while remaining at idle. I would have thought it would...
Changed the thermostat, checked the idler pulley and the raw water impeller. I thought I had the impeller in backwards at first and changed it around, but that didn’t make a difference either way to...
Got it. Thanks. I think I saw your post on the idler pulley and replaced 2 of 3 wheels last year. I did not realize there was a 3rd until I got into it. I wanted the job done, so I took a chance...
Do you happen to have the part number for the thermostat you bought? Mine got to 215 today and threw a code “ETC higher than expected stage 1”. I was only running about 31 mph for 5 minutes or so. ...
Awesome. Thank you! Yes mine is smooth.
Sent from my iPhone using Tapatalk
Was the P/N the 551246? I am having the same problem trying to figure out the part number. I see that one on Inboard Online. Just want to make sure that is correct.
Sent from my iPhone...
https://uploads.tapatalk-cdn.com/20250322/fa94b5b9a79ee536fdeabd932c92f621.jpg
It had a little wobble, so I was going to replace it while I have the belt off.
Sent from my iPhone using Tapatalk
How do you loosen the belt tension? I saw online you put a 1/2” drive socket into the tensioner, but it doesn’t seem to move easily like the video I watched. Do I need to remove or losses the hex...
Hubs are good. Truth be told, I actually pulled all 4 to clean out and replace all the old hybrid grease and check bearings. That is how I broke the brake line. [emoji849]
Sent from my iPhone...
Great tip. And yes, I have an oil extractor. Didn’t even think about it.
Sent from my iPhone using Tapatalk
I know this is an old post, but I was going to replace my belt as normal maintenance. Are you able to explain a little more in depth as to how you removed the raw water pump? Is it just the 3 bolts...
Sent from my iPhone using Tapatalk
Yeah, I am thinking about buying one of those vacuum bleeders for $30 on Amazon.
Sent from my iPhone using Tapatalk
I had to replace a brake line on my trailer over the weekend. I was pretty sure I got all the air out of the lines by manually bleeding the system. I basically had someone at the bleeder screw on...
Well, I re-downloaded the app and it is working for me now. I was thinking you had to pay for it, but I guess that is just if you want ad free or premium service.
Sent from my iPhone using...
Totally agree. I just got on Facebook in general and I hate it. I have resisted until just a few months ago, but got on for Marketplace only. Of course I jumped on the Supra / Moomba page as I ...
I would hold strong on your price. I have been in the market for a new Supra for 3 years now. Every year I keep talking myself into the price and then it jumps another freaking $40k and I give up. ...
Nice! Not close to where we were, but sounds like my kind of place. No boats = no idiots!
Sent from my iPhone using Tapatalk
What Lake in Idaho? We drove through Idaho from Salt Lake to Yellowstone thanks to the Airlines Fing up our flight a few weeks ago. I saw a bunch of boats and campers in the road and wondered what...
I have a 2018 Craz and love my wave. I have 3000 lbs of ballast plus 300lbs of lead. I typically move 200 of that around to maximize the weight depending on where people sit. Here are my settings....
Water temp was 74 in OH yesterday. It was go time for me. Of course I jumped in for a surf run 4 weeks ago and it was 58….that was a bit brisk, but with a wetsuit was tolerable once I got going. ...
Just a heads up, that image above is only the seal kit, not the full rudder box. That is also different than the stock rudder box on my 2018 Craz. I don’t know what your boat has, but I just simply...
Thanks. I will give it a try! I guess I should have known. They are in the business of selling Fatsacs. Not repair kits….
Sent from my iPhone using Tapatalk
Follow up to this. Do not waste your money on the $12 patch kit from Fat Sac. I didn’t even fill the bag and it has started to peel. Going to pull it off and try Flex Tape.
Sent from my...