Search:

Type: Posts; User: zabooda

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds; generated 42 minute(s) ago.

  1. Replies
    5
    Views
    129

    Could be a partial blockage.of your intake hose....

    Could be a partial blockage.of your intake hose. When moving the hydrostatic pressure is much higher than the raw water pump.
  2. SOLD. A prop shop owner bought it.

    SOLD. A prop shop owner bought it.
  3. Replies
    9
    Views
    134

    So the driver can see it. Ski boat days the bilge...

    So the driver can see it. Ski boat days the bilge stayed dry. If you saw water coming out, it meant your packing needed adjustment or replaced. Occasionally, when you took a good wave it would turn...
  4. Replies
    9
    Views
    134

    Too funny. Turn your bilge on manually before you...

    Too funny. Turn your bilge on manually before you come in. The auto switch is set higher.
  5. Replies
    1
    Views
    41

    My 98 Chevy had a drain hose that always worked...

    My 98 Chevy had a drain hose that always worked so I assume you don't have that. I would make the dip stick the lowest point, run the engine to heat the oil and pump out as much as you can.
  6. Replies
    17
    Views
    300

    I went down to Oregon last month with a dive crew...

    I went down to Oregon last month with a dive crew to locate 2 missing boaters who were riding on the swim deck of a Wakesetter and disappeared into the water. Where we located them indicated they...
  7. Replies
    12
    Views
    491

    Metalflake repair requires an expert so look for...

    Metalflake repair requires an expert so look for one that has done these repairs. An insurance claim would definitely occur.
  8. I see Moombacraze has spent some time at Lake...

    I see Moombacraze has spent some time at Lake Powell. It is nice to share the information as many people keep it for themselves. I found out west that most boaters don't venture too far from...
  9. Replies
    7
    Views
    403

    Great mod for the older boats. I was actually...

    Great mod for the older boats. I was actually going to buy these from Mike for my 98 Moomba and remove the fading decals but I sold the boat.
  10. Replies
    6
    Views
    145

    At least once a year someone is looking for a...

    At least once a year someone is looking for a trailer in the classifieds.
  11. Replies
    1
    Views
    77

    The Outback is a ski boat so like a ski boat they...

    The Outback is a ski boat so like a ski boat they are sensitive to weight distribution. Putting your anchor and spare prop and anything else heavy on the port side helps.
  12. Top side use of red, green and blue colors have...

    Top side use of red, green and blue colors have specific uses on the water as specified by state and Federal laws. Unfortunately, looking pretty is not one of those uses.
  13. Replies
    9
    Views
    279

    The 16 years I had my boat I never had a rock...

    The 16 years I had my boat I never had a rock chip on the hull. My trailer was completely pitted on the fenders and axle and I repainted the fenders once. The angle of the hull is not much different...
  14. Trayson got himself a groupie. Lol

    Trayson got himself a groupie. Lol
  15. Replies
    13
    Views
    263

    If it is OEM, the number on the carb is a Moomba...

    If it is OEM, the number on the carb is a Moomba number and needs to be cross referenced to the Holley number. The power valve in the kit is not the same as in the kit so that needs to be ordered...
  16. Replies
    20
    Views
    439

    Harbor freight security cables. You pick the...

    Harbor freight security cables. You pick the length. Run it through everything laying out. I used to put the bow cover on and shove everything underneath it. The cables coil up nice and are rubber...
  17. Replies
    35
    Views
    1,218

    I love that color combo and the blue metalflake...

    I love that color combo and the blue metalflake stayed true to color for the 20 years it was on my boat. The decals were getting bad but no color difference when a decal came off
  18. Get a meter and trace it out. The depthfinder may...

    Get a meter and trace it out. The depthfinder may be switched so I would check the ignition switch for power in and power out and trace it in the direction that should take you to power. Fuses and...
  19. Replies
    4
    Views
    253

    Hitch lock and also lock to an stationary object.

    Hitch lock and also lock to an stationary object.
  20. Replies
    1
    Views
    93

    It never existed for the boat owners. Dealers may...

    It never existed for the boat owners. Dealers may have had something.
  21. Your impeller housing needs to be above the...

    Your impeller housing needs to be above the waterline so lighten up the boat and check it. I had a DD so my impeller was mid-boat so it would normally be above the waterline but then I would nose up...
  22. Followup Post

    I'm still figuring out the picture posting so try this link. Also, the shaft size is 1".

    https://photos.app.goo.gl/t8AdTWjVp7jnzGwn6
  23. Water Ski Prop, Puller and Spare Parts - Perfect Condition

    I'm selling an OJ 13 x 13 LH water ski prop that was never used by me. The prop was on my 1998 Mobius that I bought in 2002 and I went to a Cutter stainless prop and kept this as a backup. The prop...
  24. Replies
    11
    Views
    374

    Same with carburated. Disconnect the gas line at...

    Same with carburated. Disconnect the gas line at the carb, jumper the pump and drain a tank in 5 minutes.
  25. Replies
    11
    Views
    374

    Carbureted or fuel injection? Carbureted is easy...

    Carbureted or fuel injection? Carbureted is easy as I did that twice a year.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4