




Type: Posts; User: DDL
Thanks for the replies. There was an indentation on each side and I thought that was from factory. Probably the corners had already started to collapse when I bought it several years. I’ll try my...
Hello all. I have 2004 Moomba XLV and one seat section requires repair and a reupholster. The section is the one that converts to a rear viewing seat. I took it apart yesterday and found the base is...
Thanks everyone for your help and suggestions on this. After filing the hose and priming the system, I fired it up and everything worked great! All ready for a nice cold Canadian winter (uugh)
Thanks and I’m leaning toward that impeller. I pulled it out yesterday and it seems good (all the fins are on and still flexible). Regarding the hose, it’s the large raw water intake line that comes...
I’ll double check all the hoses today. I only removed the raw water inlet hose at the V-Drive, replacing it with a secondary hose that ran into a bucket of antifreeze. In the past I just start the...
Hi and thanks for replying to my post. I’ll confirm that today. The bucket was on the floor and that inlet hose is just below floor level. I’ve winterized it the same way for the past 8 years and...
Hi all! I have a 2004 XLV with the Indmar 340. We had a great summer with no issues and the boat ran great. I was going to winterized it today by adding RV antifreeze after draining the block and...
Hi all! I have a 2004 XLV with the Indmar 340. We had a great summer with no issues and the boat ran great. I was going to winterized it today by adding RV antifreeze after draining the block and...
We've vacationing on Swan Lake in Montana this coming August. Does anyone know anything about the lake or any places I should stay away from?
We've done the Flathead for the past three summers but...
MABEL LAKE XLV - I've sent you a private message
Thanks for all the great tips, photos and step-by-step proceudres to walk me through the winterization of our XLV.
The one problem I have is getting the V-Drive oil changed. I purchased a 12-Volt...
I'll give the ballast a try this weekend.
Thanks for the comments and advice gang.
I find I'm always having to adjust my speed slower than faster with this XLV. This boat certainly behaves differently than the 20' Bayliner we were running...
We're running an XLV and any combination of tube or rider causes slipping in the corners. The kids like the whip on smooth water and I can't get the backside to stick long enough to get them around....
Hi gang, thanks for all the advice and feedback. Having laptop issues with no high-speed wireless and relying on an aircard that's kicked me out the last few times I've tried to reply.
Here's...
Thanks for the suggestions, I'm going to try both.
We got back to the house around 6:oo PM and had dinner. Went out to try and start it (remember it was running fine and we made it home) and it...
So here we are...day 1 of our 2 week vacation here on the Flathead Lake in Montana.
I have a 2004 XLV with the 340 HP Indmar. I know I have vapor lock issues but today was totally different.
...
I've been monitoring this site for a couple of years now and have to say how impressed I've been with how all of you chip in to help a fellow Moomba owner out. This was my first post but this site...
We're renting a property on the Flathead Lake in Montana for a couple of weeks. This isn't the property we originally had booked, but it's all we could get on very short notice due to the owner of...