That's a different boat.. :)
Sent from my Nexus 5 using Tapatalk
Printable View
That's a different boat.. :)
Sent from my Nexus 5 using Tapatalk
Close to your dimensions - but not cheap...
http://greatlakesskipper.com/powerqu...t-hinge-single
I'd suggest contacting Jon at SC directly - ask for the part number and dimensions of the hinge(s) for a 2006 OBV. Then contact your favorite SC dealer and have them order it. Will save you a lot of time. Not money necessarily, but time.
Email sent..
Probably just use a piano hinge and add some mounting hardware to the cushion then I can mount it anyway I need to..
Sent from my Nexus 5 using Tapatalk
Ok I have photos for you. Sorry it took so long.
First is looking back the width of the left hatch.
http://i334.photobucket.com/albums/m...113_150050.jpg
Width of engine hatch.
http://i334.photobucket.com/albums/m...113_150104.jpg
Width of right hatch. (Port side)
http://i334.photobucket.com/albums/m...113_150128.jpg
Hings on the left and right compartments. Front and back are the same size
http://i334.photobucket.com/albums/m...113_150207.jpg
Now the engine hatch.
http://i334.photobucket.com/albums/m...113_150318.jpg
http://i334.photobucket.com/albums/m...113_150301.jpg
http://i334.photobucket.com/albums/m...113_150338.jpg
http://i334.photobucket.com/albums/m...113_150347.jpg
Both sides of the engine hatch are the same. Hope these help.
Great! Thanks...
This is the measurement I really needed...It looks to be around an 1in, thanks!
Attachment 18812
Get an email back from Skiers Choice, should be 100589... :)
Thanks all!
That look like a hinge used on the 2008 Outback V. Part number 100589 Hinge Z ship 1” H x 3”.
So the one image I did not take with a reading is the one you needed. Always happens that way. I say it does look like one inch. If you need it I can get back out there tonight to get it for you.
No worries, that was good enough!.. Thanks!