http://youtu.be/YRyXQ_A5ixk
Almost done
2013 Moomba LSV
Printable View
http://youtu.be/YRyXQ_A5ixk
Almost done
2013 Moomba LSV
More deliveries this week :)
I found that KnuKonceptznmakesnlimengreenbpower wire, so I'm going to replace all the white that I installed this spring while I'm reconfiguring;
http://img.tapatalk.com/d/13/11/16/ypuga4yq.jpg
Also got a new led music controller. Previously I had a Wetsounds unit, but it uses a microphone to sense the music and it didn't work as well as I wanted, so I got this one that has an audio input jack.
http://img.tapatalk.com/d/13/11/16/e8e9yget.jpg
I picked up the batteries around Thanksgiving but forgot to post a pic, do here they are;
https://www.dropbox.com/s/85ou0besyy...%2055%20PM.jpg
(Not sure if Dropbox links will work?)
I finally remembered to order Hydroturf for the ski lockers, hope to have that next week, as it will be the first step of my 2014 projects.
And last but not least, I got nutty last night and pulled the trigger on 2 Exile XM30.2 amps; one for each pair of tower speakers, instead of the Harpoon for all 4. Should sound pretty good!
Try this again;
https://photos-2.dropbox.com/t/0/AAB...x4UOB-uQoPZgW4
Ian, I must have missed it , you get another pair of green 9's
Nice upgrade.
Yea, I'm adding a pair of SXT9s to the pair of XM9s that I have. I figure running separate amps will give me the ability to dial in gains more closely and control volume independently between the pairs.
Definitely post pictures of the hydroturf in the ski lockers when done. I want to do this as well
pumps and bags are done. working on the fae now.
Agreed, but I did'nt take any pictures of the 4th pump and now its hidden from view--inside of the motor panel back by the muffler, this fae is kicking my butt, you have to install metal inserts into the exhaust ports, the ports are hard plastic and were deformed, 30 minutes with a hair dryer for each side and lots force getting the ports close to round and a small hammer and the inserts are in. all in all im into this fae about 2hrs, still not done. pics when its done.....