That's quite a bit of beer. Way to stay after it.
Printable View
That's quite a bit of beer. Way to stay after it.
I finally got to spend some quality time with the boat to get some projects under way! Because I'm planning to put the 6V batteries in the rear engine hatch area (not quite sure exactly where yet) I wanted to get the lockers done - so I ripped out the carpet and started scraping the glue - what a joyous job that is! I took photos of that process, but they don't look like anything - photographing black fiberglass in a dimly lit warehouse, go figure!
A while back I ordered a large (47" x 86") sheet of gray cut groove Hydroturf with adhesive backing - I was pleasantly surprised that the material is very similar to the feel of SeaDek, but a bit cheaper.
So I brought the carpet home and used it as a template to cut the Hydroturf - hoping to get to the boat tomorrow or Monday to test fit and possibly install. Next up will be batteries and ProSport!
edit: Not sure if Dropbox links are working, so also uploaded to the (terribly quality) Tapatalk...
The carpet "template" on top of the sheet of Hydroturf;
http://img.tapatalk.com/d/14/01/26/datajyna.jpg
https://www.dropbox.com/s/j497qpaz1o...%2030%20PM.jpg
Rather than draw on the product itself I chose to put tape around the perimeter of the carpet, then draw on the tape - this way I don't have any black lines to wash out;
http://img.tapatalk.com/d/14/01/26/vemu3ybe.jpg
https://www.dropbox.com/sh/k895y8icejh5eob/uC33dsl2Qq
Man the photo hosting limitations here are really bad, what the heck happened?
Attachment 19156Direct upload to the site any better than Tapatalk?
Another test;
http://img.tapatalk.com/d/14/01/26/ary4aha8.jpg
redo the distro boxes on amp rack
rewire the amp rack
maybe do a new amp rack
would like to do:
carpet
sea dek in the bow walkway
new drivers seat and vinyl for the rest of the boat
another set of xm7's or 9's( i know i dont have the coin for this )
led lighting in the boat
replace the rockford amp with a javi
Two new sets of WS XS-808 in-boats to go with the existing in boat XS-650s, Two new W6-12s and a whole slew of new Arc Audio amps, rewire the tower with WS wires for the RGBs because I had to buy a new Sampson tower. Of course with all the new amps, I am upping the size of the power cabling and adding some more RGBs and a second controller.
At least I now have a bunch of stereo components for my pontoon boat.
Powder coating the windshield frame to match the new tower and of course the Icon8 housings.
I blame you guys and this website for continually feeding my upgraditis affliction!!
Still using it. Heated garage and nuclear reactor heated lake. But for the really cold month, replace tower speakers, maybe send the back seat out for new upholstry, fresh air exhaust, wetsounds equalizer/fader/sub control.
I just put 4 SXT9s on my tower. I think they look pretty good.
http://img.tapatalk.com/d/14/03/12/revymupe.jpg
http://img.tapatalk.com/d/14/03/12/hasaguby.jpg
Edit: you guys are right about tapatalk picture quality. Blah.
Sent from my iPhone using Tapatalk