Perfect! Sounds like a plan!
Printable View
Perfect! Sounds like a plan!
I'll take a blue one also pending reviews. I really like this option over mounting them to the rear of the boat.
Cool! We are in FL next weekend for a surf event, but I'll grab one ASAP and let you all know what I think & take plenty of pics.
If it is at all possible, can someone veryify that the light can be screwed in and not interfere with the wakeplate? There isn't a lot of clearance there.
I'll give it a go and document install, etc. let me know what all you want/need me to check out.
I may be interested in adding one blue, but really interested in how these will work and last with the wires submerged in bilge water?
I would like a blue one but like the others I would like to see a review & picture of it in the water of a boat we know. I have a buddy who may be in too pending review.
I am a probable blue, but would like to see it on a boat first.
1 year warranty. You just contact me and I'll replace with new one and get it from manufacturer. As long as you don't abuse it on 364 day to get a new color..haha...
My website would be up and running in few days. So you would have more ways to contact me.
Samsung S4...
Wolfe do you have the single piston (whatever its called that raises the wakeplate up and down) or the dual. My concern is I have the single that's directly in front of the drain plug. Wondering if this would hinder the light output
yes, the 12 has a single, electric actuator for the wakeplate and I'm sure the wakeplate will interfere with the light casting downward, but I'm curious to see if the ease of installation offsets the reduced performance.
Isn't the stock drain plug a 1/2" nps thread? I know that the center drain is 1/2" npt, but I think the rear is straight since it seals with an o-ring. Not sure how good a tapered plug will seal in a straight thread.
Sent from my Droid Charge using Tapatalk 2
Interested in Blue if you have not already ordered. Sent you a PM.
I'll take a blue one as well
LEDs are being delivered today unless I miss the shipping being somewhere else. I'll contact Drew later today once I get the LEDs in my hands.
Got the lights....seems really bright to me..I'll try to take some pix tonight once I'm at home.
Samsung S4...
I'd try to take better pix later on
http://img.tapatalk.com/d/13/06/20/zuta3ymu.jpg
Samsung S4...
Guys, the manufacturer shared a pix with me, but has asked not to publish that pix since they didn't get permission from the client yet. But I can send thru email if someone wants to see it.
Samsung S4...
Took these pix with phone
http://img.tapatalk.com/d/13/06/20/ymu9ydag.jpg
http://img.tapatalk.com/d/13/06/20/e3yry9e3.jpg
http://i643.photobucket.com/albums/u...ps0e78439e.jpg
Samsung S4...
Would love to see one of these on the back of a boat, under water.
Me too.......
Tested on Garboard Drain Base to make sure it fits perfectly.
http://i643.photobucket.com/albums/u...psf777e648.jpg
Installed in my boat
http://img.tapatalk.com/d/13/06/23/vejateba.jpg
Samsung S4...
this thread is confusing to me, maybe I've been in the sun to much!! numerous folks want to know if this going to work in the Moomba drain but we still don't have a clear answer but a pic of this device attached to a non Moomba drain....
Sent from this thing called tapatalk 2
This works on garboard 1/2" NPT drain plug...
Samsung S4...
Guys, My boat had drain plug but plastic one (non-moomba boat) So I went to academy sports in Snellville, GA (close to Drew I guess). I took plastic one out and put the Garboard Drain plug in it (took less than 10 mins to replace it).
I'm not sure which certain model got 1/2" NPT or 1/2" NPS. (hopefully, it would remove confusion about drain plug)
I tryed the drain plug light and the one i got interfered with the wakeplate will only go up 3/4 and light was also obstructedby wakeplate because it very close to it, so i ordered 2 led that go on the transom better water penetration the only down side is the holes to drill.
Ill try to post a pic later today. Cheers
Cool. Exactly what I've been waiting to hear. (well, not exactly... I hoped that it would work) If it interferes with the wakeplate, I'm out. Plus, we don't really have a clear answer whether or not this even fits in a Moomba. I understand that this fits on a garboard 1/2" NPT, but that doesn't mean anything to me. Can anyone tell us what a Moomba comes with?
https://forum.moomba.com/showthread....rain-plug-size
Samsung S4...
Heres the pic
Didn't work how to do with i pad?