The front had them glassed in, and I made some for the back out of Starboard.
Thanks for looking out though!
Printable View
The front had them glassed in, and I made some for the back out of Starboard.
Thanks for looking out though!
Ian , be careful with the batteries in the ski locker, water tends to get in there quit a bit, with no ballast it might be minimal, but the Moomba water ghosts may dampen the locker.
I spy stickerbombed Rearview?!?! I may have to borrow your idea... I don't think I'll give it back though.
Yep, it's my trademark. I did the same thing to the mirror on our '08 but I can't find a picture.
Nekked Boat , stickered mirror. Nice signature.....:cool:
Ian, ever get your racks installed?
Not yet, thinking I'm going to have a piece machined to eliminate the clamp and allow me to bolt the rack directly to the tower with the handle facing down.
This all depends on my motivation level, of course.
I got a few deliveries today; inspired by another post on here, I am going to install a heater vent behind the drivers seat, so I ordered a matching Hot Tube with chrome ring from HeaterCraft;
http://img.tapatalk.com/d/13/04/16/gaqy7uqe.jpg
I also got a light for top of the tower, to replace the flip-up factory thing;
http://img.tapatalk.com/d/13/04/16/y8yhapyj.jpg
Ian, where did you get the light? I can't stand the flip up one with the Oz bimini.
Here's a few. In NY the anchor light needs to be the highest point on the boat. Will this put it higher than the tower pylon?
http://www.bakesonline.com/searchres...CategoryID=519