Attachment 13924Attachment 13925Attachment 13926Here's what I'm looking at. Not to hijack your thread Nash just figured since it was titled Kicker this was a good place to ask the question.
Sent from my iPhone using Tapatalk
Printable View
Attachment 13924Attachment 13925Attachment 13926Here's what I'm looking at. Not to hijack your thread Nash just figured since it was titled Kicker this was a good place to ask the question.
Sent from my iPhone using Tapatalk
Thats the Kicker SKM-10. Same woofer as the OEM supplied KM-10, just comes pre-loaded in a waterproof poly enclosure. Its a great option if it fits into the desired space or for those that do not want to tackle building an enclosure. I like that with 200-250 watts rms.
Attachment 13927Here's how she's gonna sit. I'm gonna have the install done. Less than 200 out the door so I can live with that. Thanks for yalls advice and encouragement that my kicker system will well.....you know not suck to bad
Sent from my iPhone using Tapatalk
Nice work! When you having it done?
I can deal with the sub setup currently...my immediate need is getting the right amp to run those Pro 60s and moving the cabins to the 700.5. I thought about going ahead and buying the Syn2 but that is just more than I want/can spend right now. Think I want to stay with Kicker so I guess its 450.2 which will deliver 150w RMS (4ohm stereo) x2. That is what WS recommends anyway. The 350.4 will deliver 175w RMS (4ohm mono) x2 but I don't think I can get that from 2 4ohm speakers and stay at the 4ohm load can I?
But yeah that WS Dual 4ohm sub would be perfect for what I want to do. Website says it is back ordered...
Sent from my iPhone using Tapatalk
Gettin done as we type Dusty. @shop now and will be done after lunch
Sent from my iPhone using Tapatalk
Either one of those amps would power the pro60's well. If they're the same price I would go with the 350.4 a little extra power is always nice. I wonder if there isn't a way to get some kind of enclosure integrated into the hump.
The speaker is the load, and its nominal 4 ohm impedance will not change. So yes, if you bridge your Pro60's on the zxm350.4, they will be receiving the 175W x 2 output. Thats roughly the same power they would be receiving when you place them on the Syn-2 along the the MB8's
Its my understanding that the dual voice coil 10" are being discontinued, thats probably why they show BO'd. If you want one, your best bet would be to find a dealer thats go one of the DVC's left in stock by chance.