Re: What Voltage is your Trailer At?
Did you install the LEDs? Did you install them in series instead of parralle?
Sent from my Nexus 4 using Tapatalk 2
What Voltage is your Trailer At?
You have any idea what gauge wire is used for the trailer wiring? Do they wire each light in series or parallel. Most of those LED circuits are probably constant voltage or constant current setups. I'm not sure what is most common in trailer wiring. You know that the wire acts as a resistor, so you can get pretty significant voltage drop over long distances for thinner wire.
Re: What Voltage is your Trailer At?
Mike
Just for comparison, I measured the voltage on my trailer. I had 12.4 V at the truck plug and 11.6 V to 12.2 V at various lights on the trailer. Trailer was not hooked to truck, so ground was completely through plug. Trailer is 2010 basic single axle Boatmate. All LED's except license plate.
Sent from my Droid Charge using Tapatalk 2