When I switched from Kicker 700.5 to Exile Xi800.4 on the cabin speakers there was a night and day improvement.
Printable View
ACR installed;
http://img.tapatalk.com/d/12/09/06/ururary7.jpg
Going to put 2 amps on the right side, and one on the seat back;
http://img.tapatalk.com/d/12/09/06/ezyqy7aq.jpg
off to a good start there
is there not enough room on the amp board for all 3 amps ?
Not in that spot. It's like 24" high, and each amp is 10". There is ~29" (memory, I could be way off) of useable space wide, so if you really worked it you might be able to squeeze 3 horizontally. I figure I'll keep the sub amp in the seat back to keep the big heat generators (or amps that see the most use while sitting) far apart. Since the Harpoon will likely see less use I'm going to put it next to the 800.4 on the side wall.
that makes sense
More of some of the leds;
http://img.tapatalk.com/d/12/09/06/ujumazyv.jpg
http://img.tapatalk.com/d/12/09/06/yradyqas.jpg
I relocated the fire extinguisher. Going to build the box here too;
http://img.tapatalk.com/d/12/09/06/suzuvaqu.jpg
IAN - You gonna be able to use those power and ground strips for the ZLD or are you going all the way back to the battery?