I get all 3 sometimes when Riding is involved...
Time is the worst factor these days.. I could overcome the other two..
Printable View
I get all 3 sometimes when Riding is involved...
Time is the worst factor these days.. I could overcome the other two..
Newty and Moombadaze--
OK help me out here. I went out and purchased the new watermaster(Orbit) vlave. I did what you explained in your pictures. I put the pump in the water and turned it on and nothing came out. Not even a drop. Also, just to let you know, I installed the Tsunami 1200GPH pump. I wanted to make sure the pump worked. I took off the valve and there she blows. So I know the pump works. What am I doing wrong?
Tazz
Tazz, is it possible the valve is in backwards? they have a little arrow to indacate the direction water should flow.
I had mine all back together before i saw that little arrow
The arrow is pointing in the right direction. I even turned it around to see if that would work and still nothing.
Here is a stupid question, should the valve be in the horizontal position? Right now, I have the pumpin the bucket of water sitting vertical. The valve is also sitting vertical.
spring is removed in the valve? can you blow air thru the valve?
dont think vertical would make a difference.
yes the spring has been removed.
Here is another dumb question. Well when I purchased the new valve, it came with the solenoid. The solenoid is 24v. Our boats are 12v. Did you get your solenoid with a 12v of power?
1" or 3/4" valve?
Yes I can blow air through the valve. I even removed the solenoid to see if it was causing a restriction.
3/4" valve.