3 Attachment(s)
just replaced my shaft packing
I just replaced the shaft packing in my '05 Mobius LSV. It was fairly easy. It took about 1.5 hours, and I'm kind of slow. I made a little tool out of a piece of coat hanger to use for removing the old fiber that worked really well. I've attached a picture of it and a closeup of the tip. The large bends are just a way to hold it. I bent the tip 90 degrees and then ground it down to a point to be able to grab the old fiber. I also attached a picture of the wrench I used. It's a plumbing wrench I got at Home Depot.
I was a little surprised when I removed a total of 5 pieces of fiber (none of which were broken). The instructions I used said to install 2, maybe 3 pieces.
I replaced it with 3 pieces of GOR fiber. When I hand tightened it at the end of the instructions, it went all the way up against the lock nut. Does that mean I need to add another piece of fiber? Maybe that's why there were 5 in there previously?
I haven't put it in the water yet to see if it is leaking.