Printable View
Not sure if this is the right thread, but here goes. I have a 1998 mobius and the plastic mount that the seat goes on is broken. I have had no luck finding a replacement :confused: and I figured I would turn to the experts. Any help that you guys an give me would be great. :D
make an aluminum replacement ?
Which seat? Better yet, post a pic of the damaged mount as it might inspire some ideas.Quote:
Originally Posted by Potsieuf
Driver's seat, maybe?
It is the driver seat. I'll take a picture of it when I get home from work.
Sent from my HTC One X+ using Tapatalk
I would look into the Seaboard
http://www.eplastics.com/Marine_Board-SEABOARD
See if you can get it in 1-2inch thickness. Then cut the size you need, counter sink the screw holes and done.
I would personally stay away from metals due to damage of fiberglass.
Attachment 20409
The back of the black plastic is broken. I don't know where to look for that.
Sent from my HTC One X+ using Tapatalk
maybe look at some completely different, maybe look for a swivel seat base like the new Moomba's have
I will have to look into that. I wonder if they is an option with the engine in the middle of the boat.
don't see why it wont work, my base is bolted into the floor, you could cut down the seat base pipe to the height you need and then have a swivel seat mod free to boot