Originally Posted by
parrothd
Seems like an excessive amount of roll and not enough pitch, you should be closer to the stock numbers, like 1-2 degrees difference.
You should take all the ballast out and calibrate the Autowake, then surf the stock settings. Turn off Autowake and move ballast around and surf it, repeat until you get the wave you like. Turn on Autowake and record the pitch numbers, repeat this every day until you get an idea how to setup the wave. The settings will be slightly different each time out unless you have the exact same setup. Make sure you to update Autowake to latest version, contact moomba. :)
I would fill everything you have to max, put all the people and lead(near the back) on the port side. Wake plate 0, surf tab 55, speed 10.5. This should make a huge short monster wave, if it doesn't look clean remove some ballast from the opposite side. Then slowly take a bag of lead at a time and move it to the bow see how that changes the wave and repeat until it the wave gets longer. Surf it and repeat. Taking a pic of each wave helps too. :)
Wake plate = Zero-15%, as you add more wake plate the wave will lower height & Longer wave
Higher pitch = Taller height & shorter wave
Lower pitch = Lower height & Longer wave
More speed = Lower height & Longer wave
Less speed = Taller height & shorter wave