KMR-350U and aeware remote
I need to get a new HU. I'm thinking to get a KMR-350U because I've seen that it is compatible with the Aeware remote that came installed in my boat (2005 Mobius LSV). However, my current unit (KDC-MPV5025) seems to be connected to the Aeware remote via an extra wire on the back of the HU that looks like it was added on - it is not connected to a wire that is part of the wiring harness. Can anyone tell me how the Aeware remote is connected to a KMR-350U?
Thanks.
Re: KMR-350U and aeware remote
It is on single signal wire. The aeware remote has 3 wires, power, ground, signal. You want the kdc-60 remote if you're replacing the remote and you want the kmr-440u if replacing the head unit. Both are direct plug in with no splicing or new wiring harness needed.
Re: KMR-350U and aeware remote
No. The remote wire is a 12v source power wire. You take the control wire of the aeware and connect it to the control input/output wire on the new remote.
Again there are 3 wires coming out of the aeware. Power, ground, signal/control. On the new remote there will be power, ground, signal/control. Just get some butt connectors