Has anyone added wakeMakers bag busters for Moomba Makai in their Kaiyen?
Printable View
Has anyone added wakeMakers bag busters for Moomba Makai in their Kaiyen?
How does WM not have bags for the Kaiyen yet? That is crazy!!
Aren't they the same as the new Makai?
Similar hull just the length is different, but I thought that length was in the middle of the boat not the back.
I found out that the bags from manufactures are the exact ones for Makai, so I have my order in for larger bags to fit in my Kaiyen
How did they work?
I put in the Wakemakers bags for a Makai into my Kaiyen this spring and it made a huge difference. I can no easily surf with just my wife and 8 yr old in the boat with plenty of push. Sometimes it’s even too fast and I need to hit the breaks. Can easily now fill the bow bags to 100% to maximize them too. I also put in the Wakemakers vent kit eliminating the need for burping the bags and panel reinforcements.
https://uploads.tapatalk-cdn.com/202...49ad60d298.jpg
https://uploads.tapatalk-cdn.com/202...3b8de0cf9f.jpg
https://uploads.tapatalk-cdn.com/202...b50c688827.jpg
Sent from my iPhone using Tapatalk
Yes the bins need to be pulled out but I’m going to replace with HyprRyde nets. The bags are 100% plug and play (10 minute job). The vent you need to make a couple cuts and use a heat gun to get the fittings together but it’s super easy (I’m not handy at all). I believe the stock bags are 1k or 1100’s (someone correct me if I’m wrong) and the new bags are 1345 each so about 600 lbs depending on what stocks really are.
Yes the panel reinforcements are needed, it’s a small amount versus have them snap and your bags get ruined and have water all over. Contact Adam Tober on Facebook, he will hook you up.
Sent from my iPhone using Tapatalk
You will need to reinforce the divider panels. They will pop out on you at some point. Skiers Choice should be making a retrofit for these panels in my opinion. They are not designed well. Mine would pop out when just maxing out my stock bags. Make sure to screw the bottom of the panels into the aluminum track too.
Sent from my SM-G781V using Tapatalk