My perfect pass servo motor needs replacing, but I also want to replace the cable attached to it. I'm guess this is the throttle cable? How hard is it to replace the cable? Want to ask before I ordered everything. Thanks.
Printable View
My perfect pass servo motor needs replacing, but I also want to replace the cable attached to it. I'm guess this is the throttle cable? How hard is it to replace the cable? Want to ask before I ordered everything. Thanks.
Well if you are replacing the servo and the cable - I would think it would be as a single unit. Basically PP without the gauge? Or do you plan to keep the original wiring harness? I have never removed a cable from the servo - but the linkage at the carb/throttle is no big deal - a little finicky - but not difficult.
You talking the little cable that attaches to the PP servo or the entire throttle cable from up at the helm back?
That's why I was asking. When I ordered mine they sent me 2 cables to try out, one longer than the other. Swapping them was quite easy. I probably still have the instructions if needed. In fact, I believe I may still have the cable I didn't use floating around somewhere. I asked PP if they wanted me to ship it back and they said to just keep it.
If I get the chance I'll measure it tonight. If it will fit - you can have it.