Printable View
well no point in posting pictures......... my platform broke off just the same as the brackets in the earlier posts. They are at the welders right now getting fixed. poor design by moomba, why are the brackets not made out of stainless steel, then you would have no problems.
Did we get an answer on how to tighten the bracket attached to the boat?? I could not figure it out! Again bad design!!!
did the bracket on the transom break, or the bracket on the platform? Also, are you saying that when tightening the bottom bolts on the transom brackets that you can't get them to tighten? The top bolts should be accessible from inside the boat, you might have to pull the carpet back from the wall of the transom.Quote:
Originally Posted by saskie99
The bracket on the swim platform broke just like in the pictures, when i took it off I noticed the boat bracket was a little loose so I tried to tighten it and the screws just turn. I didnt realize that you can get at them from the inside of the boat, I thought they were glassed in.
on my boat, only the top bolts are accessible, the bottom bolts are below the level of the floor.Quote:
Originally Posted by saskie99
Do they just have a nut on them? I sure hope I can get at them!
Anybody out there have a 05 lsv and had to tighten the bolts on the swim platform boat bracket???
yes, the ones that are accessible have a fender washer and a nyloc on them.Quote:
Originally Posted by saskie99
Ian,
What LED light do you have? And what has been your experience with it?
Thnaks
Wow, old thread!
That boat has 3 VisionX, they were not bad, I think about $200/piece. I sold that boat 3 years ago to my dad, and he hasn't had any issues with the lights.
Edit: in that video just 1 of the VisionX. I later added 2 more. For what they cost now I'm sure there are better options, but in 2011 they were great bang for the buck.
I'd should have a look at what they are going for now.