Ok guys, back to the drawing board. I have attached a diagram I made of how our stereo is currently set up. I am really worried about two things...
First: The head unit I chose a while back, is only a 2 channel output. I should have looked more into this..so not sure if what I want to do will work with this head unit.
Second: For the tower speakers, I have 2 KS600's. Instead of having both of their sets of wires (red/black, red/black) running down the tower, I tapped them together and only have 1 set running down the tower (red/black). Is this a problem?
The reason I am asking this is because yesterday the stereo would cut out here and there. Sometimes the towers would go off, and then come back on shortly after.
The head unit also cut out once when I turned it to a certain volume...I simply turned it back on and everything worked.
Is this a power issue? Wiring issue? I have half the mind to just take it somewhere and have them wire everything but don't want to pay the big $$.
Also, the amps I chose, is because I already had them in my garage and wanted to use these first.
Any help is appreciated.
See attached diagram.
Thanks,
Cody