Originally Posted by
rdlangston13
There is nothing like receiving a brand new boat only to tear it all apart the very next day. Day one of stereo installation, go the factory amp and battery switch out, completed about 95% of the amp board. Ran RCAs, WS420 power and ground, and sub speaker wire from helm to port locker. Ran RGB wires up the tower for the rev10s and ran almost all the rgb wires for the cabin speakers. Tomorrows goal is to hang the rev10s, install amp board, rig up batteries and test.
MLA - what settings should the amps be at? SD6 running channels 1-4 on the cabins, channels 5-6 bridged on the sub. SD2 run 1 pair of rev10s per channel.