nbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbmv
Printable View
nbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbmv
someone had a little to drink tonight :)
I'll have to check back around 11 pm and see if that post makes more sense.
LOL Not Sure What That Was....Anyway, I'm going to be redoing my in boat speakers and was wondering if it would be a problem to run a 2ohm amplifier at 1.34ohm
Think I just answered my own question on how to wire my in boat speakers, I'll run them like this to see a 2.67 ohm load at the amp three speakers on the left and three on the right of a 4ch amp and bridge the other channels to the sub....
http://www.colomar.com/cgi-bin/h_imp...ZxZxZxZxZxZxZx
You are satisfying the amplifier's minimum impedance load requirement but ignoring the fact that you are distributing the power in an unequal manner. Try it first to see if you are pleased with the balance of volume between the speakers.
While there will be a power difference but if you don't hear a difference then it is okay.
I recently just redid all of my cabin speakers, like you had said, three to the left channel, 3 on the right channel in the 2.67 ohm's... no problem what so ever, It honestly sounds awsome!! my wife was impressed when we got out on the water and I cranked it up... I am running my towers currently off the same 4 channel for now, no problems as of yet.