Got started on the LEDs http://youtu.be/27uBunLIGII
2013 Moomba LSV
Printable View
Got started on the LEDs http://youtu.be/27uBunLIGII
2013 Moomba LSV
http://youtu.be/YRyXQ_A5ixk
Almost finished
2013 Moomba LSV
You should add some ones that are constant, not flashing, that's painful to watch... lol...
I can have them on solid or dancing with the music
2013 Moomba LSV
What controller are you using? I have the WS controller running the four tower Icon-8s and six in-boats and want to add quite a few more.
Is there a limit to how many LEDs you can hook up to a controller as the controller seems to put out 2A on each circuit of R-G-B?
Come on Mike, you know you need to dumb it down for me!!!
How many amps is the four Icons with rings and the six XS-650 RGBs with the additional RGB rings drawing?
When do I need to think about adding another controller? or do I need to worry?
Amp draw on a 16ft 300 LED roll of 3528 LEDs is 1.4 amps
Amp draw on a 16ft 300 LED roll of 5050 RGB LEDs with all 3 colors illuminated is 4.6A
If your LEDs are Wet Sounds supplied LEDs, they are 600 count p/ft
http://img.tapatalk.com/d/13/11/07/sazenypu.jpg
This is what I am using
www.oznium.com
2013 Moomba LSV
Time to start on the transom lights, got two of these for $145 seems like good quality heavy stainless steel housinghttp://img.tapatalk.com/d/14/01/13/udusa7e9.jpg
2013 Moomba LSV
Iam going to try and get them in some water wed. or thur. and see what they look like
Got the transom lights installed, http://img.tapatalk.com/d/14/02/08/y6u8e4yj.jpgnow I just need spring to get herehttp://img.tapatalk.com/d/14/02/08/zehy6yge.jpg
2013 Moomba LSV