Homemade Flush Kit D-drive

just wanted to share this. i made this in about two hours which includes 40 minutes drive time to home depot & back. west marine sells them for $40.00.

materials:
plunger
1/2" FIP x 1/2 MIP (or slip) adapter PVC
1/2" MIP x Garden hose adapter
1/2" O rings (rounded type)

cut hole slightly smaller than 1/2" in plunger, insert garden hose adapter with O ring, screw PVC adapter to garden hose adapter inside the plunger head.

Attachment 4220

Attachment 4221

Attachment 4222

Attachment 4223

Attachment 4224

Place proper size brick under plunger handle.

it was either the brick or try to make my wife hold it in place. i chose wisely.

Looks good! Here is another option for v-drives. I'd recommend using radiator hose though. https://forum.moomba.com/showpost.ph...0&postcount=32

Or put a broom handle in it and cut to length