I am looking at putting on the Fulton F2 Jack and was wondering if the adapter plate is what they call the weld on plate? If not can someone point me in the correct direction of the plate. Thank you!
Printable View
I am looking at putting on the Fulton F2 Jack and was wondering if the adapter plate is what they call the weld on plate? If not can someone point me in the correct direction of the plate. Thank you!
Boatmate has a bolt on plate. I think other vendors make something similar but not sure. Have you bought your jack yet?
Thank you and no I haven't purchased yet do you have a suggestion?
Working on a group buy but nothing finalized yet. So might be able to save you a few bucks if you can hold off a little.
Do you know approximately how long before you order as my jack is broke and getting to the point where I am going to need it. Let me know always interested in savings! Thank you,
Good point, Ian. That, or be prepared to cut the end of the bolt off the trailer.
I am glad that I drilled instead of cut because I had to abort the F2 installation and reinstall the original jack for a while. The supplied split lock washers were very soft metal. They were too weak to tolerate anything near the needed torque. They spread during tightening and the result was two bent machine screws, one of which cracked and broke in the plate's threaded hole!