Printable View
Has anyone installed the Moomba seat back kit or modified their step seat for behind the captains chair? As soon as we bought the boat I removed that seat in hopes people would use the walk through over the sun pad to swim platform. Now I am thinking it would be nice to use that seat as a backrest behind the captains chair for a passenger. Thanks for any guidance, advice or info.
I purchased the seat back kit from my dealer and installed it myself. Just tape off the area, test fit the seat with the bracket attached to the seat back. Then trace out the holes onto the tape and drill the holes. Make sure you run the drill in reverse until you penetrate the gel coat or it could Crack. I also used a larger bit to taper the edges of the holes and remove any sharp edges that may be more prone to cracking. Again, run the drill in reverse.Quote:
Originally Posted by KnoxMojo
Sent from my SM-G900W8 using Tapatalk
What was the damage $$? I'm thinking of getting the kit for my Craz.
Sent from my iPhone using Tapatalk
It was like $160 cdn, but I'm pretty sure they messed up and have me the bracket for free. My previous quote was more than 4x as much and I know other guys on this forum paid the same as me for just the cushion and no hardware.Quote:
Originally Posted by Stazi
Sent from my SM-G900W8 using Tapatalk
What?! For the whole kit including the seat back for the sliding center seat? I want that seat back more than the one behind the captains chair.
Sent from my iPhone using Tapatalk
Sorry I misunderstood the first post. That price was for just the backrest behind the captains chair
Sent from my SM-G900W8 using Tapatalk
i installed the factory seat back kit to the end of the seat behind the captains chair. I paid $500 from the dealer and was made to understand that was below msrp. Because of the suboptimal factory glassed in backing plate, installation was somewhat involved in regard to beefing up the backing plate, but is now rock solid. I took measurements of the craz with the setback option at the dealer.
On a side note, Knox, I would like details on how your FAE is mounted. Mine is now mounted well, but only after some custom fabrication. Just curious about yours.
Thanks.
Hmm, that'll make me think twice about installing that bracket and brace for the seat back, thanks for the info. I got my FAE early last summer and actually installed it while the boat was on my lift sitting on my paddle board, lol. Mine installed over the factory exhaust flange and it has a stainless steel tube brace that goes from the exhaust to a bracket they sent that attaches to the drain outlet. We had to cut that thing down quite a bit, the tube brace that is, to make it fit. When I sent them pics of the final install, they said they messed up and the brace was on the wrong side. I never changed it as it worked, has been solid, and has never moved. Other than going through a few cutting wheels and dropping a screw driver in the water, we had it done in right about an hour
Knox,
Thanks for that.
I have changed a prop with the boat on the lift while floating on a tube. Biggest fear was dropping a tool. I'm impressed you were able to install the FAE that way.
I am interested in how your FAE flange mates with the exhaust outlet flange. I would like to see pics if you have them. I can pm you my email if that would be easier.
Yes, the back rest is quite expensive, but includes a beefy mounting bracket, and the separate upholstered back rest. I wanted to use factory parts and my dealer quoted me a price before checking the msrp, but billed me only for his quote.
There was a thread on here a year or so ago by people that custom fabricated their own back rests and they looked quite good. I can't find that thread but maybe you can.
I will post a couple pics up on here when I have my phone later today.....I bet changing that prop while on a tube was a mother f! The FAE they sent me has an opening just slightly bigger than the exhaust flange. After taking the flapper off, it just fit right over and screwed down with the longer supplied screws they sent me.