How to remove Supra digital screen bezel?

Does anyone know how to remove this screen bezel?

https://uploads.tapatalk-cdn.com/201...caadde34b6.jpg

I lost a letter and have the replacement but has no screws and no clips, want to verify before messing up the screen.


Sent from my iPhone using Tapatalk

Does it not just press in with 3m tape back or something? Why would the bezel need to be revived?

I am thinking tape makes sense, it is billet aluminum.

The “P” and the “R” inserts both have fallen out.

SC covered it under warranty and I didn’t want to take the boat to the dealer assuming it was an easy swap.




Sent from my iPhone using Tapatalk

I'd use tape or glue before trying to remove the bezel as it doesn't look like it goes the through the back side.

Quote:

---

Originally Posted by KnoxMojo

I'd use tape or glue before trying to remove the bezel as it doesn't look like it goes the through the back side.

---

Letters that fell out are long gone.

Dealer is calling SC to get the how to tomorrow.


Sent from my iPhone using Tapatalk

I just removed mine, same thing. 4 Philips screws hold it on, one in each corner from the back side. I removed the black plastic piece that plugs in under the dash, then you can access the screws easier.

Sent from my SM-G965U using Tapatalk

Quote:

---

Originally Posted by Boatlaunch

I just removed mine, same thing. 4 Philips screws hold it on, one in each corner from the back side. I removed the black plastic piece that plugs in under the dash, then you can access the screws easier.

Sent from my SM-G965U using Tapatalk

---

Thank you sir.


Sent from my iPhone using Tapatalk