Never mind, I just found them.
Sent from my SM-N950U using Tapatalk
Printable View
Never mind, I just found them.
Sent from my SM-N950U using Tapatalk
FYI. You can order the bag direct from fatsac.com, you can customize the bag to any size you want and it's cheaper than wakemakers. :)
I did modify the hose....instead of the two overflow fittings joining a tee to the vent line like on the factory, I added a vent plug and just had a single line coming off the top of the bag since the distance between the top fittings is different.
Here is a crude drawing if it helps...https://uploads.tapatalk-cdn.com/201...518cb2eeab.jpg
Sent from my Note9 using Tapatalk
I see. I was mainly talking about the filler line off the pump. Did you modify that?
Must have been different in 16. Mine were in center from factory. I’m gunna have to move them to get them to corner i guess. I don’t want any stress in the lines or fittings
I had to make a new hose in mine as well 17 mojo. It seems if you have one center fill hose you will have to add a longer hose. But if you have the two fill then it will work fine.
1450's are huge and take up all the side storage.
https://i.imgur.com/tU8D86g.jpg
https://i.imgur.com/8Oxrg76.jpg
Did you guys have stock 600s or the 900s?
The stock 900s have two fittings in the bottom corners for fill lines, two fittings on the top of the bag for overflow/vent line and a plug on the top of the bag and the front of the leg to burp the bag.
The Enzos are the same except the two top vent fittings are much closer together.https://uploads.tapatalk-cdn.com/201...3cf878a03b.jpg
Sent from my Note9 using Tapatalk