Using stock fly high bags manually

I swapped out my stock fat sacks for the wakemakers bigger bags. If I want to use the stock bag manually , what do I need to do? I realize I’ll need a tsunami pump and need to remove the fill fitting. I’m thinking I need some sort of adapter/fittings to plug the old fill port at the bottom and one to connect the tsunami pump for manual fill?

Quote:

---

Originally Posted by Bch53211

I swapped out my stock fat sacks for the wakemakers bigger bags. If I want to use the stock bag manually , what do I need to do? I realize I’ll need a tsunami pump and need to remove the fill fitting. I’m thinking I need some sort of adapter/fittings to plug the old fill port at the bottom and one to connect the tsunami pump for manual fill?

---

These are what you are looking for. There is a video in the link also. This will help remove factory fittings

https://www.wakemakers.com/supra-moo...tting-kit.html

Be careful as some of the factory fittings are glued in and can't be removed without ruining the bag. Call the bag manufacturer just to verify

Thanks so much Byezb, just ordered it

I appreciate the heads up Scott. As it happens , fly high is about a mile from where I live, I’ll stop by and ask.

I have about 4300 lbs of ballast already but have the extra two stock 650s. I want to experiment, maybe put the extra 650 in the front to try to lengthen the wave and just curious to see if more weight helps