Outback V Bimini Mod - Short Rear Poles
I finally got my bimini mod done. I think it tuned out pretty good.
http://i1217.photobucket.com/albums/...r/DSC02020.jpg
The tubes are 2 1/2" long. I don't own a fancy crimper, so I used #8 stainless screws. I drilled and tapped holes for the screws in the tower.
http://i1217.photobucket.com/albums/...r/DSC02013.jpg
I bought the rail mount hinges from Gander Mountain / Overtons and modified them.
http://i1217.photobucket.com/albums/...r/DSC02008.jpg
I placed a sheet of 40 grit sand paper around a 1 1/4" piece of PVC pipe. The O.D. of the pipe measures about 1 5/8". I rough sanded until I got close, and finished up with some fine sand paper. I cleaned the burrs with a knife.
http://i1217.photobucket.com/albums/...r/DSC01992.jpg
The nice thing about it is that I can leave the bimini fully attached, and still fold my tower forward.