LED Trailer Runway lights on a digital bilge switch.

Quote:

---

Originally Posted by mmandley

This is the same setup i was working on in the spring when i had all the issues with my trailer lights not being at the proper voltage. My 13 trailer is all LED and i mounted all the lights to the inside of the frame. When i tied them into the trailer harness <like you did> everything went dim and i lost my MOOMBA fender lights.

Planning on woking on this more this winter.

Also i ran Amber the rear of my fenders, then switched to Red. Looks sweet when i use a 9v battery LOL.

---

Are the rest of your trailer lights LED? Mine are. I think that keeps my overall voltage draw under what the OEM incandescent lights were.

Quote:

---

Originally Posted by trayson

Sorry it took so long for me to get these for you.

Some of the OCD types would probably freak out with how I have my zip ties, but I don't really notice them.

here is a pic of the end of the trip, hence the double zip tie at the end.

https://lh6.googleusercontent.com/-T...001_171223.jpg

---

thanks for the pics.. I think ill add this to the winter bucket list.. but i may try a differnt route in mounting the lights, im one on the ocd side haha

Quote:

---

Originally Posted by powerstroke99

thanks for the pics.. I think ill add this to the winter bucket list.. but i may try a differnt route in mounting the lights, im one on the ocd side haha

---

Yeah, I've been told that you can use some painter's tape and run a bead of clear silicone to bond them to the trailer. The painter's tape would be on the strip light to make it so you're just getting silicone on the edge of the strip and not covering the LED's.