Silly Canadians...
Printable View
Nope, next guess
Getting ready to do the third incarnation of the stereo system. Since I already have the Exile SXT65's and Harpoon I'll be adding the following;
Exile Xi800.4 amp for the Polk MoMo cabins
Exile Xi1500.1 amp for the Exile sub & box
Third battery
Custom battery enclosure
Tower & cabin volume control
Upgrading main system power wire to 1/0 gauge
Tsunami voltage display distribution block
Maybe some additional LED work if funds permit
Just waiting on the weather to turn a bit :cool:
The mailman dropped off a couple small packages today...
The blue LED lights for my guages;
https://forum.moomba.com/attachment....1&d=1299547416
I tested one out with a 9V battery, and they are definately bright, I can't wait to get these in. A great looking, cheap and easy mod (for once!)
And something I forgot I ordered - Pin Switches for adding lights that turn on when you open the storage compartments (inspired by dusty2221 and KG's Supra 24). I ordered 4, but I've only really got plans for 2 of them.
https://forum.moomba.com/attachment....1&d=1297128264
I'm going to use one for the LEDs behind the spotters seat, one for the LEDs under the sun pad (aka "ski locker" on the Outback), and I'm thinking I might try to work one into a glovebox light, although I'm not sure on that just yet.
Thoroughly cleaning the boat inside and out. Un-winterizing. Then finish putting the interior back together after the winter installs.
Which consisted of:
Tower speakers
Amplifier
HU
Driver remote
Depth finder
Tower lights
New OJ prop
4 new boards
Ian, My goodies list is alot like yours. Where did you order these Pin Switches? Haven't looked for them as of yet and was thinking maybe Parts Express might have them?
Sasky - post some pictures of the trailer as you go will ya? Been thinking that would be a good mod especially where I live. Interested to see how it turns out!
Same Mods as Ian listed above (except RED).
Ian, where did you get the push button switches? Ebay? I ordered a couple rocker switches and planning on drilling them into that void as well. But I love the push style. Kinda like the keyless start buttons I've seen in the past.
I already have all the LEDs on the way, Transom LED (thanks Newty), non-skid pad for walk-through, dual zone control DONE, window tint and going to de-badge for this summer.
Yep, on eBay. I sent ya the link :)
Those switches are similiar to what we used, however, I'll tell you why we went a different style. That switch needs that nut on the front side for the front "mount" The thickness of that nut keeps the switch from being a near flushmount switch. The ones we used had a flat threaded faceplate, and I used nuts on the backside. Makesense?
Yea, when I looked back at your pictures I noticed that yours are different than mine, and I like the way yours look much more. I might re-buy, this time from PartsExpress, or I might make a bracket and mount them from behind, with just the pin popping through a hole, I'll have to tinker with it and see what I can figure out.
They are pretty easy to work with, I'm sure something like you suggested would be pretty easy to do.