It's simple, pull a cotter key, pull the pin. Lift off the swim deck.
Printable View
Thanks, I would love to do this mod this year.
Just be aware that the FAE itself does not come off with the quick release; just the platform does. The FAE will still project 5-6" beyond the wakeplate so you will lose that much clearance in your garage space.
Ah haaa. I didn't know that. I will have to take some measurements. thanks for that info.
Here's a pic of the FAE Quick Release that FAE sent me:
https://forum.moomba.com/attachment....9&d=1390486959
Attachment 19119
There's also tons of pics on their website.......www.freshairexhaust.com
If your garage space is so tight you have to remove the FAE each time, its not real difficult, just a couple band clamps. Kaneboats is correct though, the FAE does still extend 6inches apx past your wake plate, this is the Down Tube.
thought I would post a couple update, moved my ballast pumps after having to replace the impellers , thought I had the o ring gaskets in place correctly but I did not, 2 of the 4 were leaking. So here is where the pumps got moved to
http://i527.photobucket.com/albums/c...pswuodlbxq.jpg
and when the impellers need changed
http://i527.photobucket.com/albums/c...psbo10mnur.jpg
4th pumps new home
http://i527.photobucket.com/albums/c...ps0ehocvz6.jpg
with the panel closed
http://i527.photobucket.com/albums/c...ps3q7swo7u.jpg
got tired of allways sitting on the bolster so I installed a new seat pedestal-about 5 inchs higher
http://i527.photobucket.com/albums/c...psvlyurapc.jpg
and if I find some light grey minors moss I will swap out the mismatched blue
Nice mods. Do you have a link to the pedestal? My wife would be much more comfortable driving if she could sit higher.