Replying to Topic 'Sterring wheel vibration'
Cmon guys, gimme some help here!!
Replying to Topic 'Sterring wheel vibration'
Just a thought,
Could this be caused by driveshaft misalingment?
Replying to Topic 'Sterring wheel vibration'
It might be low power steering fluid, or the fan belt is too loose or too tight.
Brian
Replying to Topic 'Sterring wheel vibration'
I would check both ends of the steering cable and make sure all the fittings are tight.I have never seen an inboard ski boat with power steering.they don't need it.
Replying to Topic 'Sterring wheel vibration'
Yeah, I thought the same thing when I saw the post about the power steering fluid. "there's no power steering!! it's a frickin' rudder!" I'll take a look at the cables anyway.... It's not that bad of a vibration, I'm hoping its just a loose connection or something. Thanks for the inputs guys.
Jim
Replying to Topic 'Sterring wheel vibration'
In regards to my post on steering, I realize that it is a cable however my question was about steering fluid not POWER steering fluid. While I was installing perfect pass I noticed a small drip of oil in the bottom of the steering box where the lower tube connects. While investigating this drip I noticed the cap on this tube was loose. Which brings me to my question on the other post. I assume if oil is coming out there must be a way or a need to put it in.
FYI cruisers usually have a form of power steering.
Replying to Topic 'Sterring wheel vibration'