https://youtu.be/61zloWEOCEw
‘22 Makai
Sent from my iPhone using Tapatalk
Printable View
https://youtu.be/61zloWEOCEw
‘22 Makai
Sent from my iPhone using Tapatalk
Awesome video! It had actually popped up in my feed before I saw it here. I am going to do the dome light mod next weekend so I can turn it off on the 4th while we watch fireworks. Did you just mount the switch with double sided tape? I never realized that the bags were specific to the port and starboard side they defintely should have put that on the box and was a definite miss on Wakemakers end. I will have to climb in there and see if I just got them right by luck lol. If you aren't using your rear trays anymore venting the bags off the top and teeing in to the overflow is a great way to go I know Hak had mentioned it as well.
For sure. l’ll probably vent the bags next. I like using the rear lockers for board storage so the trays will stay out.
I used two sided tape that came on the switch. Had one laying around.
Sent from my iPhone using Tapatalk
I used a little cheap push switch out of a solar yard light from Walmart https://uploads.tapatalk-cdn.com/202...34894acae2.jpghttps://uploads.tapatalk-cdn.com/202...42d096916b.jpghttps://uploads.tapatalk-cdn.com/202...5415ffef58.jpg
Sent from my SM-G781V using Tapatalk
Very very easy to do. Just cut one wire and put the switch in the circuit. Any sort of switch will work. Just whatever you think looks the best. I looked at some little slide switches too from some kids toys!
Sent from my SM-G781V using Tapatalk
Now why couldn't SC do this in the factory? Maybe I should apply for a job there! I have tons of ideas LOL! I bet it would be a fun job designing things for boats. Did it for the telecom world for a while. Neat, but not what I would call fun.
Sent from my SM-G781V using Tapatalk
I don't know exactly what the clearance is. Would have to go measure it. That little push button I used only sticks out about 1/4", so it's never been a problem.
Sent from my SM-G781V using Tapatalk