It has a smoke tint cover. Follow the black 1/4" tubing. Here is a pic of the tank/pump unit.
http://www.bennetttrimtabs.com/image...g/V351HPU1.jpg
Printable View
It has a smoke tint cover. Follow the black 1/4" tubing. Here is a pic of the tank/pump unit.
http://www.bennetttrimtabs.com/image...g/V351HPU1.jpg
Found a pic of my '02 LSV with the pump location.
Finally got around to looking into my wake plate problem. Works been killing me!! It was low on fluid so I added some which helped. But it will not go lower than level with the boat. Took the lower screws off to make sure the plate was not jammed. Still won't go any lower. Does anyone Have a suggestion?? Thanks!
That's about as low as mine will go on my 08. Mine goes only just past the plane of the hull. How much further are you thinking it should go?
Work the plate up and down a bunch of times and check the fluid level and top it off if needed. My have air in the system that just needs to be worked out.
Could someone please post the specific kind of fluid needed? I need to top mine up, but the owner's manual does not specify. I'll buy some today to top up at the lake tomorrow at the marina (which is where my boat is).
Thanks in advance.
Same stuff...
http://www.bennetttrimtabs.com/trimtabtips.php
Sent from my Nexus 4 using Tapatalk 2