What kind of puckin question is that and how the puck is he suppose to know the puckin answer to that. -:)
Sent from my home phone..
Printable View
This is puckin crazy. Measure the cupholders, cut some PVC and epoxy it to the bottom of the cushion. But what the puck do I know?
^^^ need a like button.
This puckin thread is so far off course it's just plain puckin funny
Sent from my home phone..
You Mother puckers better be real pucking careful or ole' RD may just decide to puck you up.
Shut the puck up and go to pucking bed!!
Sent from my iPhone using Tapatalk
This pucking thread has just gone straight to H, E, dbl-hockey sticks.
I tried to build a pucking tower camera mount out of PVC and had no pucking luck finding the right size!
Sent from my iPhone newtys droid killer using Tapatalk
Ok, a few more photos of the wind block.
I used 1/2" hdpe (cutting board type product) and had to spend some time carefully measuring and cutting to get the tapered shape (top to bottom) correct in the opening when closed.
Attachment 15071
Attachment 15072
A simple set of stainless hinges works perfect.
Attachment 15073
Simple slide bolt that slides into a hole drilled in the drivers side wall and a rubber grommet superglued in to stop it from rattling.
Attachment 15074
Lastly, I used a router to round off the outside edges so it does not hurt too much if you catch it on the way to the bow.
It fits perfect under the center window when closed and really cuts out the wind. (see photo from the beginning of thread).
One of the best mods I have done- according to my wife...