^^women just don't understand!
Looks good keep the updates coming.
Printable View
^^women just don't understand!
Looks good keep the updates coming.
If I'm working on the boat in the driveway and the volume knob goes over 20% Heidi is telling me to turn it down lol
Sent from my iPhone
It's taken a while, but I finally got the sub (Xi 12D) and ZLD installed.
I used uniwarking's box design, and it works great. My facade is different since I don't have the hump, but I was able to adapt. I used 3/4" birch for the box and facade. I coated each with 3-4 coats of spray on bed liner.
The box is glued and screwed, then all of the seams are caulked.
http://www.smugmug.com/photos/i-CbJb...-CbJb2K6-L.jpg
http://www.smugmug.com/photos/i-6QCw...-6QCwDZx-L.jpg
Here it was when I was positioning it to get it under the helm. The base ends up 7" off of the floor to clear the cluster of stuff coming out of the floor. I had to move the main power wires and attach them close to where the air vent was attached to the wall. I also ended up letting the air vent hang loose. By the time it wraps around the box it doesn't have much slack left in it.
http://www.smugmug.com/photos/i-Tw3X...-Tw3XCxq-L.jpg
I used legs to help hold the rear of the box up when I was screwing it to the facade, but I then ended up removing them because it wasn't needed, and trying to get each leg cut to the proper length was a pain.
Here it is after I had the box screwed to the facade. I was able to reach my arm and head in the box to caulk around that seam also.
http://www.smugmug.com/photos/i-P8GC...-P8GCjr4-L.jpg
I later went back and cut the carpet around the hole to keep an air tight seal. I also put weather stripping around the sub.
Looks real nice, but the subwoofer grill is on sideways.
Guess it is. I was matching the pattern to the one on the speaker. Maybe I'll change it