are you doing a full ballast line job or you gonna use a pump TeamLockhart
sent from my home phone
Printable View
are you doing a full ballast line job or you gonna use a pump TeamLockhart
sent from my home phone
--you dont need one if your not running a ibs
the vent line does not need a check valve, but, if you install a a ibs off the hard tank vent you run a tee fitting prior to the ibs with a spring loaded check valve on the end of hose, this way the ibs sucks down like a raisin and the hard tank is allowed to vent and drain fully. fully automatic for both and works wonderfully
no, both legs on mine empty 100%, hardly a drop of water in the ibs.
Ahhhh I see! That makes sense
Sent from my iPhone
just to clarify, daze does have a check valve in his. it's cheap, so I'd put one in as I don't know if you could get the IBS to drain completely without it and only having one fill/drain port.
Do you mean like this?
http://www.lowes.com/pd_104423-33599...acetInfo=Check valve
This is how I am planning on adding an IBS to my Mojo. With this setup, I wouldn't need a check valve at all, correct? Is there anything stupid that I am overlooking?
http://i39.tinypic.com/auck1d.jpg
How you gonna get the water out of the LEFT side of the ibs? Once the right side is empty youre gonna suck air through the vent line.