Whine while running - tower only
Hate to repeat the preceding post, however it's a bit different of a problem. Same overpowering annoying sound coming from the XM9s. See boat and audio description in my signature. When the engine is not running, system sounds great. Crank the boat, terrible whine coming from tower speakers only. I can turn them all the way down, DC the RCA cables, the whine is still there. Only way to get it to stop is if I pull the fuse on the Exile amp.
Brian, if you read this, can you chime in also?
Whine while running - tower only
How many batteries are you running?
Whine while running - tower only
Hey Mr. Analog,
I do not have the zone controller installed yet but I intend to do it once I resolve my noise concerns. The zone controller is the dual zone ws-420. The alternator/whatever whine is more prominent in the towers than the boat. Towers are wet sounds 10" hlcd's but boat are factory.
The head unit is a Kenwood and uses the factory harness. In ignorance, that was intentional on my part.
From the sounds of it I need to re-route the ground and the power to the same location as the amplifiers as a preliminary investigation. Having said that, I would like to continue using the factory switch.
Can I reroute the ground and the power from the head unit without disturbing the switch wiring? From your post above it sounds like I only need to shift the yellow (because I fact the yellow carries the power load not the red) and the ground to match the amps and I'll be good.
Any help would be much appreciated.
Sent from my iPhone using Tapatalk