Here are some pictures of the new bag, Port, compared to the stock bag, Starboard. I only filled it one time and drained them. Not sure if it just needs sliding around a bit or what, but it didn't want to sit against the back wall of the boat where the fill & drain lines are. The shape doesn't really seem to fit the space exactly for something that was designed too. Maybe it needs adjusting in the space a bit, but not a lot of room for movement with the hoses at each end connected up. It also interferes with the tray about 2". Which is really a bummer. I can see where it could have been designed to get the same volume and work with the trays too. My fill sensor is also at the top of its limit unless I pop it off the hard tube and strap it to the flexible hose. I just run my pumps till the overflow comes out the side of the boat. Also burp all the air out just at or before 90%.
https://uploads.tapatalk-cdn.com/202...7dd805232a.jpghttps://uploads.tapatalk-cdn.com/202...f7b6c835a9.jpghttps://uploads.tapatalk-cdn.com/202...819be2adf8.jpghttps://uploads.tapatalk-cdn.com/202...7bb11656b4.jpg
Sent from my SM-G781V using Tapatalk