LSV locker support screw anchors

I'm getting the upholstery on my LSV locker tops and engine cover replaced by a neighbor. I took some of the upholstery off of one of the lockers. I had a problem removing some of the screws that hold the strut support bracket to the aluminum board. The threaded tube thing that the screws anchor into had rusted a bit. I need to replace the threaded tube thing, but I don't know what it is called. From the side, it is T shaped. From the top it is circular with a hole in the middle. Also, it has 3 teeth on the edges of the circle that sink down into the aluminum board when it is tightened. Can someone tell me what to look for?

Thanks

Why not take a minute and shoot a pic of the part and post it up here?

Unfortunately, I already threw them away.

http://youtu.be/ZY_uGAx3rxE

I think you are describing tee nuts: http://www.lowes.com/Fasteners/Nuts/..._/N-1z0yk2d/pl#!

http://i160.photobucket.com/albums/t...roziggy/45.gif

Quote:

---

Originally Posted by brain_rinse

I think you are describing tee nuts: http://www.lowes.com/Fasteners/Nuts/..._/N-1z0yk2d/pl#!

---

Those are the ones! Thanks!

LOL Drew!!