Anyone have any used fat sacs they are looking to sell? I im wanting to add or upgrade my G3 stock rear lockers for wakesuring.
Printable View
Anyone have any used fat sacs they are looking to sell? I im wanting to add or upgrade my G3 stock rear lockers for wakesuring.
What sizes are you looking for?
Like 500lbs+ anything bigger than the stock 400lbs.
Ill have 2 600's as soon as my order arrives from wake makers. They are from '13 mojo.
Can you send me pics of the sacs to my email? [email protected]
Do they have the the dual quick disconnects one for filling and one for emptying?
Thanks,
Jared
I tried to snap some pics in the locker but not much luck. They look just like these: https://forum.moomba.com/showthread....t=jmvotto+sacs say fill and drain ports and hold downs just different dimensions.
Anyone out there know what they might be?
The black factory Mojo rear locker bags are 650, and they have 3 ports, 1 rear bottom, 1 front bottom, 1 top vent. They are how ever 1 inch fittings and glued in, so you will need to switch fitting unless you plan to run 1 inch lines and fittings.
If you ordered new bags from Wake Makers then make sure you know how many ports and order plugs for the ports you dont need and new fittings for the ports you do need unless you plan to remove the factory fittings from or factory bags.
Can the glued fittings be removed somehow? Heat gun possibly help loosen it? I assume my LSV has 3/4 hoses right?
Yes and yes Wake Makers has a video on how to remove them with a hairdryer.
http://media.wakemakers.com/2012/02/...high-fittings/
Yes, they can. I would assume the seller would keep the 1 " fittings and put in new bags.
Heat gun on low for 4 to 5 minutes
http://media.wakemakers.com/2012/02/...high-fittings/
Mike you got faster fingers tn me on the iPad.... Lol