5 Attachment(s)
Prototype Makai rear bags
Got lucky to get some prototype rear bags for the Makai from WM.
The are basically the WM rear bags + an extension (all one piece) to go under the bench seat (halfway). Some rough math = ~600lb addition over the standard WM bags. Only downside was I had to move my tube to the front of the boat for storage.
Install was super easy. I'm considering running an extra vent off the top like many of you have done, but wanted to get an initial test before hand. I'm sure I'm still dealing with some air etc.
Attachment 30582
How far it fills up the bench storage when full
Attachment 30583
How it looks under corner seat when full
Attachment 30584
Bags full ( seemed a few inches lower than before).
Attachment 30585
Obligatory wave picture. Windy day. Small crew. Bags Full. No autowake, just 100/100/100 fill and tab 70%. Riding the wave: the push is improved and I've moved the speed from 10.4 with the old WM bags to 11.1 with these. I can ride a few feet farther back now. Still need to dial in the settings more.
Attachment 30586