Indmar temperature gauge not working

I have a 2005 moomba mobius LS that I bought 2 weeks ago. The guy said his mechanic forgot to hook the temp gauge wires back up. There are 2 wires coming out of the wire tube that you can see in the first picture. One of them is not connected to anything. I have tried looking for a place for it to hook up but can't find anything. The bottom picture is where the other wire is connect. I am assuming there are 2 sensor probs. I tried google searching the location of the inmar temp probs with no luck. Please can anyone help??!? I have also tried switching the wires.
http://i98.photobucket.com/albums/l2...ps8ddb3dfa.jpg
http://i98.photobucket.com/albums/l2...ps64797b70.jpg

All right. Be patient. We'll get someone with your model to have a look and get you an answer. LS guys! Let's help a brother out here.

I am dealing with this on my new boat. One that is hooked up is the water temp sender. It sends the signal to your gauge and tells the ECM how cold the engine it. The other (if it's tan with a black stripe), goes to a water temp switch. This switch sends a signal to the ECM if there is an overheat condition in order to go into "limp mode"

Of course, this is the info that I found out about in my indmar engine with TBI. Your may be different. Also long as your gauge is working fine and you watch it, it MAY not NEED to be hooked up. A dealer can tell you.

The "other location may be under your finger in the first picture; there is a plug screwed into the intake.

Alright so both this wires are not for my temperature gauge. Can anyone post a picture of the location of the temperature gauge probe for the temp gauge. My gauge does not work and I thought it was cause of the tan wire with the black stripe not being plugged in. I have the indmar assault 310 carb.

Ive got the same motor in my 2000 LS. I'll make you a trade...

My water temp works but my oil pressure is always 60+ psi almost maxing out the gauge. I'll take a pic of the water sender tomorrow afternoon (dark out now and cover is in the rig). Would you mind taking a pic of your oil pressure sender under the port exhaust manifold? Should be a two wire situation like your water temp sender...

Sent from my S3 using Tapatalk 2

Is this the picture you wanted? I found another wire plug that wasn't plugged into anything. You can see it in the top two pictures. This is just crazy!

http://i98.photobucket.com/albums/l2...ps5665232f.jpg
http://i98.photobucket.com/albums/l2...psbd2ea12a.jpg
http://i98.photobucket.com/albums/l2...psbe63d659.jpg

I hope this is it. Also I see another plug wire that is not connected to anything. That I have no idea what it is. But my oil pressure works fine.

http://i98.photobucket.com/albums/l2...ps5665232f.jpg
http://i98.photobucket.com/albums/l2...psbe63d659.jpg

Water sender:

Attachment 18166

Tan wire is connecter to sender. Tan with black is tied off, which has an original female barrel connector.

Oil sender:

Attachment 18167

Blue wire attached to oil sender. Tan with blue is tied off but has a connector like it used to be on the sender. Ideas?

Hope it helps!


Sent from my S3 using Tapatalk 2

I hope these pictures help. I see one new wire plug that is not hooked up to anything.

http://i98.photobucket.com/albums/l2...psbe63d659.jpg
http://i98.photobucket.com/albums/l2...ps5665232f.jpg

I have tried to reply 3 different times and it won't post to the forum!
I have a lose wire like you do that is not hooked up to anything. I hope these pictures help.

http://i98.photobucket.com/albums/l2...psbe63d659.jpg
http://i98.photobucket.com/albums/l2...ps5665232f.jpg

Every time i post the picture links it doesn't post my reply??

Quote:

---

Originally Posted by Stroble

Every time i post the picture links it doesn't post my reply??

---

I have better success uploading from Tapatalk but through the forum, you have to put the picture on a hosting site such as Photobucket. Then come back the the forum and click insert image then 'from URL', use the IMG line from Photobucket.

When I try uploading one using the 'from computer' option, I get error #2038 after the upload bar finishes.

http://i98.photobucket.com/albums/l2...psbe63d659.jpghttp://i98.photobucket.com/albums/l2...ps5665232f.jpg

http://i98.photobucket.com/albums/l2...ps5665232f.jpg

http://i98.photobucket.com/albums/l2...ps5665232f.jpg
Oil Sender

It keeps saying this everything I use any links in the reply.

"Thank you for posting! Your post will not be visible until a moderator has approved it for posting."

Quote:

---

Originally Posted by Stroble

It keeps saying this everything I use any links in the reply.

"Thank you for posting! Your post will not be visible until a moderator has approved it for posting."

---

That's strange, especially since your initial post had images in it. Hey Berg, any help on this?!?

OK, can you see them all now? (I think after you get to 10 posts you will not need moderator approval for links or pics.)

There they are! All 20 of them, ha! Thanks Kane.

Of course wire colors are different through the years, but looks like both are using the blue wire to the oil sender and the non striped wire to the water sender. I'll look at my book when I get home tonight to see if it goes up to '05 and report back.

Quote:

---

Originally Posted by aerolland

There they are! All 20 of them, ha! Thanks Kane.

---

Because we (moderators) can see the pictures immediately we don't always notice that the thread is marked as a "moderated thread"-- the type in the corner is pretty small. We approve all of these as long as there's nothing shady in the links.

Sorry about the over post. I bought i new sending unit from advanced auto parts. The gauge still didn't read anything. I called today and ordered a new gauge for the moomba dealer. I hope this will fix the problem. Will keep ya'll updated.

The guys at skidim told me that a marine sending unit operates at a different ohms than a car. Have you tried test the gauge with a power source?

No, How do I test the gauge, Is it the purple wire that i unhook?