need a measurement on the 12 LSV

Hey guys.

Help me help Corey with Evolution covers.

He needs the measurement from a 12 LSV with OZ tower.

Measurement from the windshield to the base of the tower. The base as in where it bolts on the tower. Also the length of the base when liking at it fromthe side of the boat.

I don't think it matters if you have OZ HD or not but I'll take both measurements.

Thanks.

Mike, do you mean the white space here?

https://www.dropbox.com/s/x9zca4u26u0am90/LSV.JPG?dl=1

Yes and also the length of the base of your tower where it mounts. Basically I think hes trying to make the placement for the stretch part of the cover to go around the tower.

Ok so now I'm worried. He just shipped me a cover for my 2012 LSV with Oz tower. I'll let you know if it fits or not?

I'll see what I can get tomorrow evening

Quote:

---

Originally Posted by Andyshaw

Ok so now I'm worried. He just shipped me a cover for my 2012 LSV with Oz tower. I'll let you know if it fits or not?

---

I wouldn't worry about it. He has a customer back east that is having fit issues so he wants to verify on someone elses boat to make sure everything is ok.

Hes been good thus far, and i guess the proof will be in the fit. When mine arrives ill fit it and take some pix and try and post them. Can get the measurement needed then too.

Quote:

---

Originally Posted by Andyshaw

Hes been good thus far, and i guess the proof will be in the fit. When mine arrives ill fit it and take some pix and try and post them. Can get the measurement needed then too.

---

Awesome. Now remember the cover is very tight when new, as you use it more and more it gets easier to work with. The zippers are stuff and hard to start at first but after a bit of time they get easier.

I have had 2 covers from Evolution and wouldn't use anyone else.

Have my boat in driveway cleaning it this week.

I got...
21" from edge of windshield frame to front edge of tower base.
16 1/2" width of tower base

Quote:

---

Originally Posted by mparker2997

Have my boat in driveway cleaning it this week.

I got...
21" from edge of windshield frame to front edge of tower base.
16 1/2" width of tower base

---

Awesome thanks man.

Mine are close:
I would say 21.5" from windshield (maybe 21.25"), and 16.75" for the base.

https://www.dropbox.com/s/gjsbwxahr6...%20pm.jpg?dl=1

https://www.dropbox.com/s/xb2oinss1j...%20pm.jpg?dl=1

Great thanks Woody, I figure there will be just a little wiggle room due to who installs it at the factory but those are both close enough I think. I forwarded the info to Cory