My first mod...Cooler removal
So I decided to jump in with a fairly easy mod and do the cooler removal. I had read a few times about cutting it out and ordering an AO cooler that is soft sided that will fit right in. I didn't have a dremel tool so I decided to try an angle grinder I had. Probably not the best tool but worked ok. Toughest part was getting the blade into the corners. I tried to keep a shop vac going while working but still gets pretty messy.
Attachment 18457Attachment 18458Attachment 18459Attachment 18460Attachment 18461
My first mod...Cooler removal
Not sure what year it started, but in my 2012 the cooler was just held in by 4 screws. I didn't have to cut anything. The AO is much better, and much easier to get bevs to/from the boat.