Got my domed numbers on the boat today. They look pretty darn good! Thanks for the recommendation.
Printable View
Got my domed numbers on the boat today. They look pretty darn good! Thanks for the recommendation.
Sweet. We really like ours...it was nice to get some pics on the water today. Took the old iPhone for a float to get some pics and turned out pretty good. Glad you like the domed reg numbers. I think it was a pretty good price for a great product.
Our Seadek teak platform will be here on the 20th. Can't wait to get that on... We just had our boat interior autocad so that we can get a price on Seadeking the floor.
You may want to check out this for your floor, too.
http://www.poseidonflooring.com/index.htm
Let us know what you do on the flooring-- with pics!
Would like to know when you start your carpet install as that is on my list just haven't found any info on replacing the carpet in an LS just the LSV. Great looking boat!
Ok, We started to get our LS ready for the summer. A small project is moving in to an overhaul, but well needed and fun. So here are a bunch of pictures of the process. We will continue to update you over the next week or two until we finish up and are water ready. Thanks for all the comments and look forward to any questions or comments.
Attachment 16931
Attachment 16932
Attachment 16933
Attachment 16934
Attachment 16935
We are replacing all the lines and once we started to we found fresh water hoses kinked and debris in the oil cooler screen. Trans Mounts were in bad shape so we decided to re powder coat and install stainless hardware. We are also replacing all the fuel line, fresh water hose, wet exhaust hose, and ballast hose.
Attachment 16936
Attachment 16937
Attachment 16938
Attachment 16939
Attachment 16940
So we have gotten the hull cleaned up and awaiting our carpet samples to arrive from Corinthian Marine Carpet. As you can see the tranny is out getting a new seal and pressure plate.
Attachment 16941
Attachment 16942
Attachment 16943
Attachment 16944
Here I have stripped the casting and getting ready polish, I also put new bushings in it. The trans mounts have been powder coated and new stainless hardware, and all the new hoses, new steering cable will be replaced as well since everything is off.
We are also machining a new drive shaft. It should be ready beginning of next week.
We also purchased a new prop and will get the old one will be rebalanced and freshened up for a backup.
So I was able to get approval from the wifey...as I scanned Craigslist I found the Wetsound System I have wanted, but didn't want to spend $2200 on them.
Well a deal of $800...I had no choice but to get them...I will be taking the covers off to paint white, but this is a deal I couldn't resist!
The wifey said " Happy Birthday, Merry Christmas, Happy Easter, Valentines, Thanksgiving, and everything in between! You are covered with all the updates, changes, and purchases for the year."
I WILL TAKE IT...
Attachment 16945
Attachment 16946
Attachment 16947
The boat they were on...Mariah. I would take that too, but $50K is out of my reach...It was a bad ass boat for sure.