-
Here are mine;
I still need to put some TexhFlex over the wire, but I think this method looks good.
Edit; Dropbox links not working; hosted on TapaTalk;
http://img.tapatalk.com/450eb55c-fa10-a2f1.jpg
http://img.tapatalk.com/450eb55c-fa1c-48a0.jpg
-
FWIW. This is also part of my project. I'll probably use a ribbed flex tube to close in the wires.
http://i1203.photobucket.com/albums/...oat/tower4.jpg
-
I used a Neutrik connector from PartsExpress. Easy twist/snap connection that can be disconnected extremely easily. Not that I have ever had a need to remove my tower, but if I do. Maybe thinking ahead for the next owner?? :)
Picture #25 in my profile under upgrades.
I did search for the deusch style to match the OEM plug on the driver's side but they were harder to track down and these ended up being less expensive.
Either way - I personally wanted a quick disconnect!
-
Thanks for the help guys. I will be drilling the hole friday.
-
Begin preparing now and get the beer in the fridge.
-
3 Attachment(s)
I just drilled a hole under the tower foot and then had to come out for a jump between the tower and then one more at the top.
Attachment 14013
Attachment 14014
Attachment 14015